一、 看板材封边

A, see plank sealing side

优质中药柜的封边细腻、光滑、手感好，封线平直光滑，接头精细。专业大厂用直线封边机一次完成封边、断头、修边、倒角、抛光等工序，保证最精确的尺寸。

High quality medicine cupboard in the sealing side is exquisite, smooth, feel is good, seal line straight and smooth, fine joint. Professional company with a complete machine of linear sealing side sealing side, beheaded, deburring, chamfering, polishing process, to ensure the most accurate size.

作坊式小厂是用刷子涂胶，人工压贴封边，用壁纸刀来修边，用手动抛光机抛光，由于压力不均匀，很多地方不牢固，还会造成甲醛等有害物挥发到空气中。

Mill type small plant is to use brush gelatinize, artificial pressure sealing side, wallpaper knife is used to trimming and polishing machine polishing by hand, because of the uneven pressure, many places do not strong, also can cause such as formaldehyde harmful to evaporate into the air.

二、看抽屉的滑轨

Second, the slippery course of drawer

虽然是很小的细节，却是影响中药柜质量的重要部分。由于孔位和尺寸误差造成滑轨安装尺寸配合上出现误差，造成抽屉拉动不顺畅或左右松动的状况，还要注意抽屉缝隙是否均匀。

Although is a small detail, is a important part of affecting the quality of the medicine cabinet. Due to hole location and size error error appears on the slippery course to install dimension to cooperate, cause the drawer pull around not smooth or loose condition and also note drawer aperture is even.

三、看榫卯结构

Three, the mortise and tenon joint structure

榫卯结构是实木中药柜中相连接的两构件上采用的一种凹凸处理接合方式。凸出部分叫榫(或榫头);凹进部分叫卯(或榫眼、榫槽)。这种形式在我国传统家具中达到很高的技艺水平，同时也常见于其他木、竹、石制的器物中。

Mortise and tenon joint structure is solid wood used in the two components of Chinese medicine chest connected a bump joint processing ways. Bulge call tenon (or joint); Concave part called bases (or mortise and tenon chamfer). This form in Chinese traditional furniture reached very high skill level, but also common in other wood, bamboo, stone artifacts.